Join the 155,000+ IMP followers

www.aero-defence.tech

HandySCAN 3D MAX Series brings portable metrology to aerospace development and inspection

The HandySCAN MAX EVO and MAX EVO Elite extend the EVO platform to large-part measurement for quality, MRO and NDT workflows.

  www.faro.com
HandySCAN 3D MAX Series brings portable metrology to aerospace development and inspection

For aerospace teams measuring large and complex components, the HandySCAN 3D MAX Series brings portable, metrology-grade 3D scanning to product development and quality workflows. The next-generation HandySCAN MAX EVO and HandySCAN MAX EVO Elite extend the EVO platform experience to large-part measurement, supporting quality control, quality assurance, maintenance, repair and overhaul (MRO) and non-destructive testing (NDT). Their portable design enables teams to capture 3D measurements directly where aircraft structures and components are developed, inspected or maintained, rather than relying exclusively on fixed metrology workstations.

Two accuracy levels for development and quality
The HandySCAN MAX EVO supports aerospace product development teams with a volumetric accuracy of 0.150 mm + 0.020 mm/m, while the MAX EVO Elite addresses large component inspection and NDT workflows requiring higher precision, with a volumetric accuracy of 0.075 mm + 0.010 mm/m. The MAX Series maintains measurement reliability and accredited accuracy in accordance with ISO 17025 and VDI/VDE 2634. The system is designed to measure a broad range of part sizes, complex geometries and challenging surfaces, including highly reflective materials, without surface preparation. This can help streamline measurement of components such as fuselage sections, wings and structural assemblies by reducing setup and disassembly requirements.

Measurement outside controlled environments
Integrated photogrammetry supports accurate measurement of large and complex parts outside controlled environments. This is particularly relevant for aerospace maintenance operations, where inspections often take place on the hangar floor and aircraft downtime must be minimised, as accurate 3D data can be captured without extensive setup or moving parts to a dedicated inspection area. When paired with the Mobility Kit, the MAX Series enables wireless, cable-free inspections for daily quality control, reducing reliance on fixed workstations, carts and cable setups.

Real-time feedback on the device
The EVO platform includes an embedded screen that brings scanner control and real-time data visualisation to the device. By keeping scan data and the physical part within the operator's line of sight, the platform can support more comfortable measurement work, including complex, elevated and overhead scanning tasks. Real-time mesh visualisation also enables operators to validate data coverage as they scan, helping to identify missed areas before leaving the part. For teams working in hangars and other real-world environments, this combination of mobility, continuous feedback and fast data acquisition supports a more efficient scan-to-report process.

Additional Context:
This section explains general principles of large-volume optical measurement not included in the original press release.

Handheld 3D scanners build a model by combining many individual measurements taken from different positions. Over long distances, small alignment errors between these measurements can add up, which is why volumetric accuracy is often specified as a fixed value plus a length-dependent term, such as a value per metre of measured length.

Photogrammetry addresses this by first measuring the positions of reference targets across the whole part to create an accurate global framework. The scanner then aligns its local data to this framework, limiting the build-up of errors over large structures. Reflective surfaces are another common challenge in optical measurement, because they can reflect light away from the sensor rather than scattering it back, which is why the ability to scan such surfaces without coating or other preparation is relevant for bare metal aerospace parts.

Edited by an industrial journalist, Lekshman Ramdas, with AI assistance.

www.faro.com

  Ask For More Information…

LinkedIn
Pinterest

Join the 155,000+ IMP followers

International